id
stringlengths 12
12
| text
stringlengths 52
14k
| token_count
int64 10
5.52k
|
|---|---|---|
9EDMU3JS5GRN
|
Given a single positive integer x, we will write an expression of the form x (op1) x (op2) x (op3) x ... where each operator op1, op2, etc. is either addition, subtraction, multiplication, or division (+, -, *, or /). For example, with x = 3, we might write 3 * 3 / 3 + 3 - 3 which is a value of 3.
When writing such an expression, we adhere to the following conventions:
The division operator (/) returns rational numbers.
There are no parentheses placed anywhere.
We use the usual order of operations: multiplication and division happens before addition and subtraction.
It's not allowed to use the unary negation operator (-). For example, "x - x" is a valid expression as it only uses subtraction, but "-x + x" is not because it uses negation.
We would like to write an expression with the least number of operators such that the expression equals the given target. Return the least number of operators used.
Example 1:
Input: x = 3, target = 19
Output: 5
Explanation: 3 * 3 + 3 * 3 + 3 / 3. The expression contains 5 operations.
Example 2:
Input: x = 5, target = 501
Output: 8
Explanation: 5 * 5 * 5 * 5 - 5 * 5 * 5 + 5 / 5. The expression contains 8 operations.
Example 3:
Input: x = 100, target = 100000000
Output: 3
Explanation: 100 * 100 * 100 * 100. The expression contains 3 operations.
Note:
2 <= x <= 100
1 <= target <= 2 * 10^8
[
| 401 |
0WZDKI2E27Q7
|
We write the integers of A and B (in the order they are given) on two separate horizontal lines.
Now, we may draw connecting lines: a straight line connecting two numbers A[i] and B[j] such that:
A[i] == B[j];
The line we draw does not intersect any other connecting (non-horizontal) line.
Note that a connecting lines cannot intersect even at the endpoints: each number can only belong to one connecting line.
Return the maximum number of connecting lines we can draw in this way.
Example 1:
Input: A = [1,4,2], B = [1,2,4]
Output: 2
Explanation: We can draw 2 uncrossed lines as in the diagram.
We cannot draw 3 uncrossed lines, because the line from A[1]=4 to B[2]=4 will intersect the line from A[2]=2 to B[1]=2.
Example 2:
Input: A = [2,5,1,2,5], B = [10,5,2,1,5,2]
Output: 3
Example 3:
Input: A = [1,3,7,1,7,5], B = [1,9,2,5,1]
Output: 2
Note:
1 <= A.length <= 500
1 <= B.length <= 500
1 <= A[i], B[i] <= 2000
[
| 306 |
08LAASR5H1T6
|
Given the coordinates of four points in 2D space, return whether the four points could construct a square.
The coordinate (x,y) of a point is represented by an integer array with two integers.
Example:
Input: p1 = [0,0], p2 = [1,1], p3 = [1,0], p4 = [0,1]
Output: True
Note:
All the input integers are in the range [-10000, 10000].
A valid square has four equal sides with positive length and four equal angles (90-degree angles).
Input points have no order.
[
| 126 |
Q8YK6J31FXN2
|
Given an integer array arr, you should partition the array into (contiguous) subarrays of length at most k. After partitioning, each subarray has their values changed to become the maximum value of that subarray.
Return the largest sum of the given array after partitioning.
Example 1:
Input: arr = [1,15,7,9,2,5,10], k = 3
Output: 84
Explanation: arr becomes [15,15,15,9,10,10,10]
Example 2:
Input: arr = [1,4,1,5,7,3,6,1,9,9,3], k = 4
Output: 83
Example 3:
Input: arr = [1], k = 1
Output: 1
Constraints:
1 <= arr.length <= 500
0 <= arr[i] <= 109
1 <= k <= arr.length
[
| 199 |
G76TY6G2ZCHE
|
Some people will make friend requests. The list of their ages is given and ages[i] is the age of the ith person.
Person A will NOT friend request person B (B != A) if any of the following conditions are true:
age[B] <= 0.5 * age[A] + 7
age[B] > age[A]
age[B] > 100 && age[A] < 100
Otherwise, A will friend request B.
Note that if A requests B, B does not necessarily request A. Also, people will not friend request themselves.
How many total friend requests are made?
Example 1:
Input: [16,16]
Output: 2
Explanation: 2 people friend request each other.
Example 2:
Input: [16,17,18]
Output: 2
Explanation: Friend requests are made 17 -> 16, 18 -> 17.
Example 3:
Input: [20,30,100,110,120]
Output: 3
Explanation: Friend requests are made 110 -> 100, 120 -> 110, 120 -> 100.
Notes:
1 <= ages.length <= 20000.
1 <= ages[i] <= 120.
[
| 268 |
L8YMURHW6VRI
|
Return the number of distinct non-empty substrings of text that can be written as the concatenation of some string with itself (i.e. it can be written as a + a where a is some string).
Example 1:
Input: text = "abcabcabc"
Output: 3
Explanation: The 3 substrings are "abcabc", "bcabca" and "cabcab".
Example 2:
Input: text = "leetcodeleetcode"
Output: 2
Explanation: The 2 substrings are "ee" and "leetcodeleetcode".
Constraints:
1 <= text.length <= 2000
text has only lowercase English letters.
[
| 140 |
J27LRXJ08YLR
|
Given an integer array with all positive numbers and no duplicates, find the number of possible combinations that add up to a positive integer target.
Example:
nums = [1, 2, 3]
target = 4
The possible combination ways are:
(1, 1, 1, 1)
(1, 1, 2)
(1, 2, 1)
(1, 3)
(2, 1, 1)
(2, 2)
(3, 1)
Note that different sequences are counted as different combinations.
Therefore the output is 7.
Follow up:
What if negative numbers are allowed in the given array?
How does it change the problem?
What limitation we need to add to the question to allow negative numbers?
Credits:Special thanks to @pbrother for adding this problem and creating all test cases.
[
| 181 |
05140DGOQIDY
|
There are two types of soup: type A and type B. Initially we have N ml of each type of soup. There are four kinds of operations:
Serve 100 ml of soup A and 0 ml of soup B
Serve 75 ml of soup A and 25 ml of soup B
Serve 50 ml of soup A and 50 ml of soup B
Serve 25 ml of soup A and 75 ml of soup B
When we serve some soup, we give it to someone and we no longer have it. Each turn, we will choose from the four operations with equal probability 0.25. If the remaining volume of soup is not enough to complete the operation, we will serve as much as we can. We stop once we no longer have some quantity of both types of soup.
Note that we do not have the operation where all 100 ml's of soup B are used first.
Return the probability that soup A will be empty first, plus half the probability that A and B become empty at the same time.
Example:
Input: N = 50
Output: 0.625
Explanation:
If we choose the first two operations, A will become empty first. For the third operation, A and B will become empty at the same time. For the fourth operation, B will become empty first. So the total probability of A becoming empty first plus half the probability that A and B become empty at the same time, is 0.25 * (1 + 1 + 0.5 + 0) = 0.625.
Notes:
0 <= N <= 10^9.
Answers within 10^-6 of the true value will be accepted as correct.
[
| 364 |
ULO7EXDDZ6E8
|
Given a string representing a code snippet, you need to implement a tag validator to parse the code and return whether it is valid. A code snippet is valid if all the following rules hold:
The code must be wrapped in a valid closed tag. Otherwise, the code is invalid.
A closed tag (not necessarily valid) has exactly the following format : <TAG_NAME>TAG_CONTENT</TAG_NAME>. Among them, <TAG_NAME> is the start tag, and </TAG_NAME> is the end tag. The TAG_NAME in start and end tags should be the same. A closed tag is valid if and only if the TAG_NAME and TAG_CONTENT are valid.
A valid TAG_NAME only contain upper-case letters, and has length in range [1,9]. Otherwise, the TAG_NAME is invalid.
A valid TAG_CONTENT may contain other valid closed tags, cdata and any characters (see note1) EXCEPT unmatched <, unmatched start and end tag, and unmatched or closed tags with invalid TAG_NAME. Otherwise, the TAG_CONTENT is invalid.
A start tag is unmatched if no end tag exists with the same TAG_NAME, and vice versa. However, you also need to consider the issue of unbalanced when tags are nested.
A < is unmatched if you cannot find a subsequent >. And when you find a < or </, all the subsequent characters until the next > should be parsed as TAG_NAME (not necessarily valid).
The cdata has the following format : <![CDATA[CDATA_CONTENT]]>. The range of CDATA_CONTENT is defined as the characters between <![CDATA[ and the first subsequent ]]>.
CDATA_CONTENT may contain any characters. The function of cdata is to forbid the validator to parse CDATA_CONTENT, so even it has some characters that can be parsed as tag (no matter valid or invalid), you should treat it as regular characters.
Valid Code Examples:
Input: "<DIV>This is the first line <![CDATA[<div>]]></DIV>"
Output: True
Explanation:
The code is wrapped in a closed tag : <DIV> and </DIV>.
The TAG_NAME is valid, the TAG_CONTENT consists of some characters and cdata.
Although CDATA_CONTENT has unmatched start tag with invalid TAG_NAME, it should be considered as plain text, not parsed as tag.
So TAG_CONTENT is valid, and then the code is valid. Thus return true.
Input: "<DIV>>> ![cdata[]] <![CDATA[<div>]>]]>]]>>]</DIV>"
Output: True
Explanation:
We first separate the code into : start_tag|tag_content|end_tag.
start_tag -> "<DIV>"
end_tag -> "</DIV>"
tag_content could also be separated into : text1|cdata|text2.
text1 -> ">> ![cdata[]] "
cdata -> "<![CDATA[<div>]>]]>", where the CDATA_CONTENT is "<div>]>"
text2 -> "]]>>]"
The reason why start_tag is NOT "<DIV>>>" is because of the rule 6.
The reason why cdata is NOT "<![CDATA[<div>]>]]>]]>" is because of the rule 7.
Invalid Code Examples:
Input: "<A> <B> </A> </B>"
Output: False
Explanation: Unbalanced. If "<A>" is closed, then "<B>" must be unmatched, and vice versa.
Input: "<DIV> div tag is not closed <DIV>"
Output: False
Input: "<DIV> unmatched < </DIV>"
Output: False
Input: "<DIV> closed tags with invalid tag name <b>123</b> </DIV>"
Output: False
Input: "<DIV> unmatched tags with invalid tag name </1234567890> and <CDATA[[]]> </DIV>"
Output: False
Input: "<DIV> unmatched start tag <B> and unmatched end tag </C> </DIV>"
Output: False
Note:
For simplicity, you could assume the input code (including the any characters mentioned above) only contain letters, digits, '<','>','/','!','[',']' and ' '.
[
| 859 |
H5JQEK22ZMP3
|
Given an array A of integers, return the length of the longest arithmetic subsequence in A.
Recall that a subsequence of A is a list A[i_1], A[i_2], ..., A[i_k] with 0 <= i_1 < i_2 < ... < i_k <= A.length - 1, and that a sequence B is arithmetic if B[i+1] - B[i] are all the same value (for 0 <= i < B.length - 1).
Example 1:
Input: A = [3,6,9,12]
Output: 4
Explanation:
The whole array is an arithmetic sequence with steps of length = 3.
Example 2:
Input: A = [9,4,7,2,10]
Output: 3
Explanation:
The longest arithmetic subsequence is [4,7,10].
Example 3:
Input: A = [20,1,15,3,10,5,8]
Output: 4
Explanation:
The longest arithmetic subsequence is [20,15,10,5].
Constraints:
2 <= A.length <= 1000
0 <= A[i] <= 500
[
| 252 |
COMRVO5VWN1L
|
Given a non-negative integer N, find the largest number that is less than or equal to N with monotone increasing digits.
(Recall that an integer has monotone increasing digits if and only if each pair of adjacent digits x and y satisfy x .)
Example 1:
Input: N = 10
Output: 9
Example 2:
Input: N = 1234
Output: 1234
Example 3:
Input: N = 332
Output: 299
Note:
N is an integer in the range [0, 10^9].
[
| 120 |
AUBOM0U71RR4
|
There are N children standing in a line. Each child is assigned a rating value.
You are giving candies to these children subjected to the following requirements:
Each child must have at least one candy.
Children with a higher rating get more candies than their neighbors.
What is the minimum candies you must give?
Example 1:
Input: [1,0,2]
Output: 5
Explanation: You can allocate to the first, second and third child with 2, 1, 2 candies respectively.
Example 2:
Input: [1,2,2]
Output: 4
Explanation: You can allocate to the first, second and third child with 1, 2, 1 candies respectively.
The third child gets 1 candy because it satisfies the above two conditions.
[
| 165 |
JJTXUWSY7PI8
|
Return the length of the shortest, non-empty, contiguous subarray of A with sum at least K.
If there is no non-empty subarray with sum at least K, return -1.
Example 1:
Input: A = [1], K = 1
Output: 1
Example 2:
Input: A = [1,2], K = 4
Output: -1
Example 3:
Input: A = [2,-1,2], K = 3
Output: 3
Note:
1 <= A.length <= 50000
-10 ^ 5 <= A[i] <= 10 ^ 5
1 <= K <= 10 ^ 9
[
| 150 |
HA8L8NMGNBKK
|
Given an integer array bloomDay, an integer m and an integer k.
We need to make m bouquets. To make a bouquet, you need to use k adjacent flowers from the garden.
The garden consists of n flowers, the ith flower will bloom in the bloomDay[i] and then can be used in exactly one bouquet.
Return the minimum number of days you need to wait to be able to make m bouquets from the garden. If it is impossible to make m bouquets return -1.
Example 1:
Input: bloomDay = [1,10,3,10,2], m = 3, k = 1
Output: 3
Explanation: Let's see what happened in the first three days. x means flower bloomed and _ means flower didn't bloom in the garden.
We need 3 bouquets each should contain 1 flower.
After day 1: [x, _, _, _, _] // we can only make one bouquet.
After day 2: [x, _, _, _, x] // we can only make two bouquets.
After day 3: [x, _, x, _, x] // we can make 3 bouquets. The answer is 3.
Example 2:
Input: bloomDay = [1,10,3,10,2], m = 3, k = 2
Output: -1
Explanation: We need 3 bouquets each has 2 flowers, that means we need 6 flowers. We only have 5 flowers so it is impossible to get the needed bouquets and we return -1.
Example 3:
Input: bloomDay = [7,7,7,7,12,7,7], m = 2, k = 3
Output: 12
Explanation: We need 2 bouquets each should have 3 flowers.
Here's the garden after the 7 and 12 days:
After day 7: [x, x, x, x, _, x, x]
We can make one bouquet of the first three flowers that bloomed. We cannot make another bouquet from the last three flowers that bloomed because they are not adjacent.
After day 12: [x, x, x, x, x, x, x]
It is obvious that we can make two bouquets in different ways.
Example 4:
Input: bloomDay = [1000000000,1000000000], m = 1, k = 1
Output: 1000000000
Explanation: You need to wait 1000000000 days to have a flower ready for a bouquet.
Example 5:
Input: bloomDay = [1,10,2,9,3,8,4,7,5,6], m = 4, k = 2
Output: 9
Constraints:
bloomDay.length == n
1 <= n <= 10^5
1 <= bloomDay[i] <= 10^9
1 <= m <= 10^6
1 <= k <= n
[
| 643 |
YOSGEG4LEF7W
|
Given a binary string s (a string consisting only of '0' and '1's).
Return the number of substrings with all characters 1's.
Since the answer may be too large, return it modulo 10^9 + 7.
Example 1:
Input: s = "0110111"
Output: 9
Explanation: There are 9 substring in total with only 1's characters.
"1" -> 5 times.
"11" -> 3 times.
"111" -> 1 time.
Example 2:
Input: s = "101"
Output: 2
Explanation: Substring "1" is shown 2 times in s.
Example 3:
Input: s = "111111"
Output: 21
Explanation: Each substring contains only 1's characters.
Example 4:
Input: s = "000"
Output: 0
Constraints:
s[i] == '0' or s[i] == '1'
1 <= s.length <= 10^5
[
| 216 |
G56JB4TD9V4X
|
You are given two strings s1 and s2 of equal length consisting of letters "x" and "y" only. Your task is to make these two strings equal to each other. You can swap any two characters that belong to different strings, which means: swap s1[i] and s2[j].
Return the minimum number of swaps required to make s1 and s2 equal, or return -1 if it is impossible to do so.
Example 1:
Input: s1 = "xx", s2 = "yy"
Output: 1
Explanation:
Swap s1[0] and s2[1], s1 = "yx", s2 = "yx".
Example 2:
Input: s1 = "xy", s2 = "yx"
Output: 2
Explanation:
Swap s1[0] and s2[0], s1 = "yy", s2 = "xx".
Swap s1[0] and s2[1], s1 = "xy", s2 = "xy".
Note that you can't swap s1[0] and s1[1] to make s1 equal to "yx", cause we can only swap chars in different strings.
Example 3:
Input: s1 = "xx", s2 = "xy"
Output: -1
Example 4:
Input: s1 = "xxyyxyxyxx", s2 = "xyyxyxxxyx"
Output: 4
Constraints:
1 <= s1.length, s2.length <= 1000
s1, s2 only contain 'x' or 'y'.
[
| 358 |
PXMNO87FNYA4
|
A string is called a happy prefix if is a non-empty prefix which is also a suffix (excluding itself).
Given a string s. Return the longest happy prefix of s .
Return an empty string if no such prefix exists.
Example 1:
Input: s = "level"
Output: "l"
Explanation: s contains 4 prefix excluding itself ("l", "le", "lev", "leve"), and suffix ("l", "el", "vel", "evel"). The largest prefix which is also suffix is given by "l".
Example 2:
Input: s = "ababab"
Output: "abab"
Explanation: "abab" is the largest prefix which is also suffix. They can overlap in the original string.
Example 3:
Input: s = "leetcodeleet"
Output: "leet"
Example 4:
Input: s = "a"
Output: ""
Constraints:
1 <= s.length <= 10^5
s contains only lowercase English letters.
[
| 210 |
WEM7X68AIX3N
|
We are given S, a length n string of characters from the set {'D', 'I'}. (These letters stand for "decreasing" and "increasing".)
A valid permutation is a permutation P[0], P[1], ..., P[n] of integers {0, 1, ..., n}, such that for all i:
If S[i] == 'D', then P[i] > P[i+1], and;
If S[i] == 'I', then P[i] < P[i+1].
How many valid permutations are there? Since the answer may be large, return your answer modulo 10^9 + 7.
Example 1:
Input: "DID"
Output: 5
Explanation:
The 5 valid permutations of (0, 1, 2, 3) are:
(1, 0, 3, 2)
(2, 0, 3, 1)
(2, 1, 3, 0)
(3, 0, 2, 1)
(3, 1, 2, 0)
Note:
1 <= S.length <= 200
S consists only of characters from the set {'D', 'I'}.
[
| 265 |
9W4PJXGMGUF3
|
There is a pizza with 3n slices of varying size, you and your friends will take slices of pizza as follows:
You will pick any pizza slice.
Your friend Alice will pick next slice in anti clockwise direction of your pick.
Your friend Bob will pick next slice in clockwise direction of your pick.
Repeat until there are no more slices of pizzas.
Sizes of Pizza slices is represented by circular array slices in clockwise direction.
Return the maximum possible sum of slice sizes which you can have.
Example 1:
Input: slices = [1,2,3,4,5,6]
Output: 10
Explanation: Pick pizza slice of size 4, Alice and Bob will pick slices with size 3 and 5 respectively. Then Pick slices with size 6, finally Alice and Bob will pick slice of size 2 and 1 respectively. Total = 4 + 6.
Example 2:
Input: slices = [8,9,8,6,1,1]
Output: 16
Output: Pick pizza slice of size 8 in each turn. If you pick slice with size 9 your partners will pick slices of size 8.
Example 3:
Input: slices = [4,1,2,5,8,3,1,9,7]
Output: 21
Example 4:
Input: slices = [3,1,2]
Output: 3
Constraints:
1 <= slices.length <= 500
slices.length % 3 == 0
1 <= slices[i] <= 1000
[
| 330 |
RFLW8I1635UE
|
Alice and Bob continue their games with piles of stones. There are several stones arranged in a row, and each stone has an associated value which is an integer given in the array stoneValue.
Alice and Bob take turns, with Alice starting first. On each player's turn, that player can take 1, 2 or 3 stones from the first remaining stones in the row.
The score of each player is the sum of values of the stones taken. The score of each player is 0 initially.
The objective of the game is to end with the highest score, and the winner is the player with the highest score and there could be a tie. The game continues until all the stones have been taken.
Assume Alice and Bob play optimally.
Return "Alice" if Alice will win, "Bob" if Bob will win or "Tie" if they end the game with the same score.
Example 1:
Input: values = [1,2,3,7]
Output: "Bob"
Explanation: Alice will always lose. Her best move will be to take three piles and the score become 6. Now the score of Bob is 7 and Bob wins.
Example 2:
Input: values = [1,2,3,-9]
Output: "Alice"
Explanation: Alice must choose all the three piles at the first move to win and leave Bob with negative score.
If Alice chooses one pile her score will be 1 and the next move Bob's score becomes 5. The next move Alice will take the pile with value = -9 and lose.
If Alice chooses two piles her score will be 3 and the next move Bob's score becomes 3. The next move Alice will take the pile with value = -9 and also lose.
Remember that both play optimally so here Alice will choose the scenario that makes her win.
Example 3:
Input: values = [1,2,3,6]
Output: "Tie"
Explanation: Alice cannot win this game. She can end the game in a draw if she decided to choose all the first three piles, otherwise she will lose.
Example 4:
Input: values = [1,2,3,-1,-2,-3,7]
Output: "Alice"
Example 5:
Input: values = [-1,-2,-3]
Output: "Tie"
Constraints:
1 <= values.length <= 50000
-1000 <= values[i] <= 1000
[
| 523 |
MMTDZJCPKWA9
|
Your task is to form an integer array nums from an initial array of zeros arr that is the same size as nums.
Return the minimum number of function calls to make nums from arr.
The answer is guaranteed to fit in a 32-bit signed integer.
Example 1:
Input: nums = [1,5]
Output: 5
Explanation: Increment by 1 (second element): [0, 0] to get [0, 1] (1 operation).
Double all the elements: [0, 1] -> [0, 2] -> [0, 4] (2 operations).
Increment by 1 (both elements) [0, 4] -> [1, 4] -> [1, 5] (2 operations).
Total of operations: 1 + 2 + 2 = 5.
Example 2:
Input: nums = [2,2]
Output: 3
Explanation: Increment by 1 (both elements) [0, 0] -> [0, 1] -> [1, 1] (2 operations).
Double all the elements: [1, 1] -> [2, 2] (1 operation).
Total of operations: 2 + 1 = 3.
Example 3:
Input: nums = [4,2,5]
Output: 6
Explanation: (initial)[0,0,0] -> [1,0,0] -> [1,0,1] -> [2,0,2] -> [2,1,2] -> [4,2,4] -> [4,2,5](nums).
Example 4:
Input: nums = [3,2,2,4]
Output: 7
Example 5:
Input: nums = [2,4,8,16]
Output: 8
Constraints:
1 <= nums.length <= 10^5
0 <= nums[i] <= 10^9
[
| 417 |
D8AXJJN0NOXD
|
Given two strings: s1 and s2 with the same size, check if some permutation of string s1 can break some permutation of string s2 or vice-versa (in other words s2 can break s1).
A string x can break string y (both of size n) if x[i] >= y[i] (in alphabetical order) for all i between 0 and n-1.
Example 1:
Input: s1 = "abc", s2 = "xya"
Output: true
Explanation: "ayx" is a permutation of s2="xya" which can break to string "abc" which is a permutation of s1="abc".
Example 2:
Input: s1 = "abe", s2 = "acd"
Output: false
Explanation: All permutations for s1="abe" are: "abe", "aeb", "bae", "bea", "eab" and "eba" and all permutation for s2="acd" are: "acd", "adc", "cad", "cda", "dac" and "dca". However, there is not any permutation from s1 which can break some permutation from s2 and vice-versa.
Example 3:
Input: s1 = "leetcodee", s2 = "interview"
Output: true
Constraints:
s1.length == n
s2.length == n
1 <= n <= 10^5
All strings consist of lowercase English letters.
[
| 320 |
34ZEBFW6DVXI
|
Given a sorted positive integer array nums and an integer n, add/patch elements to the array such that any number in range [1, n] inclusive can be formed by the sum of some elements in the array. Return the minimum number of patches required.
Example 1:
Input: nums = [1,3], n = 6
Output: 1
Explanation:
Combinations of nums are [1], [3], [1,3], which form possible sums of: 1, 3, 4.
Now if we add/patch 2 to nums, the combinations are: [1], [2], [3], [1,3], [2,3], [1,2,3].
Possible sums are 1, 2, 3, 4, 5, 6, which now covers the range [1, 6].
So we only need 1 patch.
Example 2:
Input: nums = [1,5,10], n = 20
Output: 2
Explanation: The two patches can be [2, 4].
Example 3:
Input: nums = [1,2,2], n = 5
Output: 0
[
| 253 |
RUL18SUPP03K
|
Given s1, s2, s3, find whether s3 is formed by the interleaving of s1 and s2.
Example 1:
Input: s1 = "aabcc", s2 = "dbbca", s3 = "aadbbcbcac"
Output: true
Example 2:
Input: s1 = "aabcc", s2 = "dbbca", s3 = "aadbbbaccc"
Output: false
[
| 95 |
L90VR345L7XA
|
Given a positive 32-bit integer n, you need to find the smallest 32-bit integer which has exactly the same digits existing in the integer n and is greater in value than n. If no such positive 32-bit integer exists, you need to return -1.
Example 1:
Input: 12
Output: 21
Example 2:
Input: 21
Output: -1
[
| 85 |
QU74LTLI4XNU
|
Given an N x N grid containing only values 0 and 1, where 0 represents water and 1 represents land, find a water cell such that its distance to the nearest land cell is maximized and return the distance.
The distance used in this problem is the Manhattan distance: the distance between two cells (x0, y0) and (x1, y1) is |x0 - x1| + |y0 - y1|.
If no land or water exists in the grid, return -1.
Example 1:
Input: [[1,0,1],[0,0,0],[1,0,1]]
Output: 2
Explanation:
The cell (1, 1) is as far as possible from all the land with distance 2.
Example 2:
Input: [[1,0,0],[0,0,0],[0,0,0]]
Output: 4
Explanation:
The cell (2, 2) is as far as possible from all the land with distance 4.
Note:
1 <= grid.length == grid[0].length <= 100
grid[i][j] is 0 or 1
[
| 254 |
ZPYNWUJORKFM
|
The string "PAYPALISHIRING" is written in a zigzag pattern on a given number of rows like this: (you may want to display this pattern in a fixed font for better legibility)
P A H N
A P L S I I G
Y I R
And then read line by line: "PAHNAPLSIIGYIR"
Write the code that will take a string and make this conversion given a number of rows:
string convert(string s, int numRows);
Example 1:
Input: s = "PAYPALISHIRING", numRows = 3
Output: "PAHNAPLSIIGYIR"
Example 2:
Input: s = "PAYPALISHIRING", numRows = 4
Output: "PINALSIGYAHRPI"
Explanation:
P I N
A L S I G
Y A H R
P I
[
| 195 |
0E7ORYFT0C4Y
|
Given a string, find the length of the longest substring without repeating characters.
Examples:
Given "abcabcbb", the answer is "abc", which the length is 3.
Given "bbbbb", the answer is "b", with the length of 1.
Given "pwwkew", the answer is "wke", with the length of 3. Note that the answer must be a substring, "pwke" is a subsequence and not a substring.
[
| 98 |
KG65JATO6TXH
|
Given a sequence of n integers a1, a2, ..., an, a 132 pattern is a subsequence ai, aj, ak such
that i < j < k and ai < ak < aj. Design an algorithm that takes a list of n numbers as input and checks whether there is a 132 pattern in the list.
Note: n will be less than 15,000.
Example 1:
Input: [1, 2, 3, 4]
Output: False
Explanation: There is no 132 pattern in the sequence.
Example 2:
Input: [3, 1, 4, 2]
Output: True
Explanation: There is a 132 pattern in the sequence: [1, 4, 2].
Example 3:
Input: [-1, 3, 2, 0]
Output: True
Explanation: There are three 132 patterns in the sequence: [-1, 3, 2], [-1, 3, 0] and [-1, 2, 0].
[
| 221 |
0PC1ZJOG49L7
|
You are given a rows x cols matrix grid. Initially, you are located at the top-left corner (0, 0), and in each step, you can only move right or down in the matrix.
Among all possible paths starting from the top-left corner (0, 0) and ending in the bottom-right corner (rows - 1, cols - 1), find the path with the maximum non-negative product. The product of a path is the product of all integers in the grid cells visited along the path.
Return the maximum non-negative product modulo 109 + 7. If the maximum product is negative return -1.
Notice that the modulo is performed after getting the maximum product.
Example 1:
Input: grid = [[-1,-2,-3],
[-2,-3,-3],
[-3,-3,-2]]
Output: -1
Explanation: It's not possible to get non-negative product in the path from (0, 0) to (2, 2), so return -1.
Example 2:
Input: grid = [[1,-2,1],
[1,-2,1],
[3,-4,1]]
Output: 8
Explanation: Maximum non-negative product is in bold (1 * 1 * -2 * -4 * 1 = 8).
Example 3:
Input: grid = [[1, 3],
[0,-4]]
Output: 0
Explanation: Maximum non-negative product is in bold (1 * 0 * -4 = 0).
Example 4:
Input: grid = [[ 1, 4,4,0],
[-2, 0,0,1],
[ 1,-1,1,1]]
Output: 2
Explanation: Maximum non-negative product is in bold (1 * -2 * 1 * -1 * 1 * 1 = 2).
Constraints:
1 <= rows, cols <= 15
-4 <= grid[i][j] <= 4
[
| 445 |
QWUJ1EVK4TAV
|
Validate if a given string is numeric.
Some examples:
"0" => true
" 0.1 " => true
"abc" => false
"1 a" => false
"2e10" => true
Note: It is intended for the problem statement to be ambiguous. You should gather all requirements up front before implementing one.
Update (2015-02-10):
The signature of the C++ function had been updated. If you still see your function signature accepts a const char * argument, please click the reload button to reset your code definition.
[
| 117 |
6U8CZN84H4B7
|
Given two numbers, hour and minutes. Return the smaller angle (in degrees) formed between the hour and the minute hand.
Example 1:
Input: hour = 12, minutes = 30
Output: 165
Example 2:
Input: hour = 3, minutes = 30
Output: 75
Example 3:
Input: hour = 3, minutes = 15
Output: 7.5
Example 4:
Input: hour = 4, minutes = 50
Output: 155
Example 5:
Input: hour = 12, minutes = 0
Output: 0
Constraints:
1 <= hour <= 12
0 <= minutes <= 59
Answers within 10^-5 of the actual value will be accepted as correct.
[
| 168 |
Z71NZ2NOVTUQ
|
Given a string, your task is to count how many palindromic substrings in this string.
The substrings with different start indexes or end indexes are counted as different substrings even they consist of same characters.
Example 1:
Input: "abc"
Output: 3
Explanation: Three palindromic strings: "a", "b", "c".
Example 2:
Input: "aaa"
Output: 6
Explanation: Six palindromic strings: "a", "a", "a", "aa", "aa", "aaa".
Note:
The input string length won't exceed 1000.
[
| 132 |
2913XJ7CRQNR
|
Given an array of integers arr, you are initially positioned at the first index of the array.
In one step you can jump from index i to index:
i + 1 where: i + 1 < arr.length.
i - 1 where: i - 1 >= 0.
j where: arr[i] == arr[j] and i != j.
Return the minimum number of steps to reach the last index of the array.
Notice that you can not jump outside of the array at any time.
Example 1:
Input: arr = [100,-23,-23,404,100,23,23,23,3,404]
Output: 3
Explanation: You need three jumps from index 0 --> 4 --> 3 --> 9. Note that index 9 is the last index of the array.
Example 2:
Input: arr = [7]
Output: 0
Explanation: Start index is the last index. You don't need to jump.
Example 3:
Input: arr = [7,6,9,6,9,6,9,7]
Output: 1
Explanation: You can jump directly from index 0 to index 7 which is last index of the array.
Example 4:
Input: arr = [6,1,9]
Output: 2
Example 5:
Input: arr = [11,22,7,7,7,7,7,7,7,22,13]
Output: 3
Constraints:
1 <= arr.length <= 5 * 10^4
-10^8 <= arr[i] <= 10^8
[
| 345 |
VNDGLT6MY589
|
Given a string s and an array of integers cost where cost[i] is the cost of deleting the ith character in s.
Return the minimum cost of deletions such that there are no two identical letters next to each other.
Notice that you will delete the chosen characters at the same time, in other words, after deleting a character, the costs of deleting other characters will not change.
Example 1:
Input: s = "abaac", cost = [1,2,3,4,5]
Output: 3
Explanation: Delete the letter "a" with cost 3 to get "abac" (String without two identical letters next to each other).
Example 2:
Input: s = "abc", cost = [1,2,3]
Output: 0
Explanation: You don't need to delete any character because there are no identical letters next to each other.
Example 3:
Input: s = "aabaa", cost = [1,2,3,4,1]
Output: 2
Explanation: Delete the first and the last character, getting the string ("aba").
Constraints:
s.length == cost.length
1 <= s.length, cost.length <= 10^5
1 <= cost[i] <= 10^4
s contains only lowercase English letters.
[
| 272 |
UP9T439EKCAH
|
You are installing a billboard and want it to have the largest height. The billboard will have two steel supports, one on each side. Each steel support must be an equal height.
You have a collection of rods which can be welded together. For example, if you have rods of lengths 1, 2, and 3, you can weld them together to make a support of length 6.
Return the largest possible height of your billboard installation. If you cannot support the billboard, return 0.
Example 1:
Input: [1,2,3,6]
Output: 6
Explanation: We have two disjoint subsets {1,2,3} and {6}, which have the same sum = 6.
Example 2:
Input: [1,2,3,4,5,6]
Output: 10
Explanation: We have two disjoint subsets {2,3,5} and {4,6}, which have the same sum = 10.
Example 3:
Input: [1,2]
Output: 0
Explanation: The billboard cannot be supported, so we return 0.
Note:
0 <= rods.length <= 20
1 <= rods[i] <= 1000
The sum of rods is at most 5000.
[
| 270 |
C9B108VSA2RO
|
Given two equal-size strings s and t. In one step you can choose any character of t and replace it with another character.
Return the minimum number of steps to make t an anagram of s.
An Anagram of a string is a string that contains the same characters with a different (or the same) ordering.
Example 1:
Input: s = "bab", t = "aba"
Output: 1
Explanation: Replace the first 'a' in t with b, t = "bba" which is anagram of s.
Example 2:
Input: s = "leetcode", t = "practice"
Output: 5
Explanation: Replace 'p', 'r', 'a', 'i' and 'c' from t with proper characters to make t anagram of s.
Example 3:
Input: s = "anagram", t = "mangaar"
Output: 0
Explanation: "anagram" and "mangaar" are anagrams.
Example 4:
Input: s = "xxyyzz", t = "xxyyzz"
Output: 0
Example 5:
Input: s = "friend", t = "family"
Output: 4
Constraints:
1 <= s.length <= 50000
s.length == t.length
s and t contain lower-case English letters only.
[
| 289 |
812BCX0QFSMZ
|
There are N gas stations along a circular route, where the amount of gas at station i is gas[i].
You have a car with an unlimited gas tank and it costs cost[i] of gas to travel from station i to its next station (i+1). You begin the journey with an empty tank at one of the gas stations.
Return the starting gas station's index if you can travel around the circuit once in the clockwise direction, otherwise return -1.
Note:
If there exists a solution, it is guaranteed to be unique.
Both input arrays are non-empty and have the same length.
Each element in the input arrays is a non-negative integer.
Example 1:
Input:
gas = [1,2,3,4,5]
cost = [3,4,5,1,2]
Output: 3
Explanation:
Start at station 3 (index 3) and fill up with 4 unit of gas. Your tank = 0 + 4 = 4
Travel to station 4. Your tank = 4 - 1 + 5 = 8
Travel to station 0. Your tank = 8 - 2 + 1 = 7
Travel to station 1. Your tank = 7 - 3 + 2 = 6
Travel to station 2. Your tank = 6 - 4 + 3 = 5
Travel to station 3. The cost is 5. Your gas is just enough to travel back to station 3.
Therefore, return 3 as the starting index.
Example 2:
Input:
gas = [2,3,4]
cost = [3,4,3]
Output: -1
Explanation:
You can't start at station 0 or 1, as there is not enough gas to travel to the next station.
Let's start at station 2 and fill up with 4 unit of gas. Your tank = 0 + 4 = 4
Travel to station 0. Your tank = 4 - 3 + 2 = 3
Travel to station 1. Your tank = 3 - 3 + 3 = 3
You cannot travel back to station 2, as it requires 4 unit of gas but you only have 3.
Therefore, you can't travel around the circuit once no matter where you start.
[
| 498 |
EB67P4CUFEOB
|
Given the strings s1 and s2 of size n, and the string evil. Return the number of good strings.
A good string has size n, it is alphabetically greater than or equal to s1, it is alphabetically smaller than or equal to s2, and it does not contain the string evil as a substring. Since the answer can be a huge number, return this modulo 10^9 + 7.
Example 1:
Input: n = 2, s1 = "aa", s2 = "da", evil = "b"
Output: 51
Explanation: There are 25 good strings starting with 'a': "aa","ac","ad",...,"az". Then there are 25 good strings starting with 'c': "ca","cc","cd",...,"cz" and finally there is one good string starting with 'd': "da".
Example 2:
Input: n = 8, s1 = "leetcode", s2 = "leetgoes", evil = "leet"
Output: 0
Explanation: All strings greater than or equal to s1 and smaller than or equal to s2 start with the prefix "leet", therefore, there is not any good string.
Example 3:
Input: n = 2, s1 = "gx", s2 = "gz", evil = "x"
Output: 2
Constraints:
s1.length == n
s2.length == n
s1 <= s2
1 <= n <= 500
1 <= evil.length <= 50
All strings consist of lowercase English letters.
[
| 333 |
ZMA59W2TBY7S
|
Given two arrays of integers nums1 and nums2, return the number of triplets formed (type 1 and type 2) under the following rules:
Type 1: Triplet (i, j, k) if nums1[i]2 == nums2[j] * nums2[k] where 0 <= i < nums1.length and 0 <= j < k < nums2.length.
Type 2: Triplet (i, j, k) if nums2[i]2 == nums1[j] * nums1[k] where 0 <= i < nums2.length and 0 <= j < k < nums1.length.
Example 1:
Input: nums1 = [7,4], nums2 = [5,2,8,9]
Output: 1
Explanation: Type 1: (1,1,2), nums1[1]^2 = nums2[1] * nums2[2]. (4^2 = 2 * 8).
Example 2:
Input: nums1 = [1,1], nums2 = [1,1,1]
Output: 9
Explanation: All Triplets are valid, because 1^2 = 1 * 1.
Type 1: (0,0,1), (0,0,2), (0,1,2), (1,0,1), (1,0,2), (1,1,2). nums1[i]^2 = nums2[j] * nums2[k].
Type 2: (0,0,1), (1,0,1), (2,0,1). nums2[i]^2 = nums1[j] * nums1[k].
Example 3:
Input: nums1 = [7,7,8,3], nums2 = [1,2,9,7]
Output: 2
Explanation: There are 2 valid triplets.
Type 1: (3,0,2). nums1[3]^2 = nums2[0] * nums2[2].
Type 2: (3,0,1). nums2[3]^2 = nums1[0] * nums1[1].
Example 4:
Input: nums1 = [4,7,9,11,23], nums2 = [3,5,1024,12,18]
Output: 0
Explanation: There are no valid triplets.
Constraints:
1 <= nums1.length, nums2.length <= 1000
1 <= nums1[i], nums2[i] <= 10^5
[
| 550 |
DIOFJCUEDA76
|
Given an absolute path for a file (Unix-style), simplify it.
For example,
path = "/home/", => "/home"
path = "/a/./b/../../c/", => "/c"
Corner Cases:
Did you consider the case where path = "/../"?
In this case, you should return "/".
Another corner case is the path might contain multiple slashes '/' together, such as "/home//foo/".
In this case, you should ignore redundant slashes and return "/home/foo".
[
| 106 |
RKVR1KJYH957
|
Write a program to find the n-th ugly number.
Ugly numbers are positive numbers whose prime factors only include 2, 3, 5.
Example:
Input: n = 10
Output: 12
Explanation: 1, 2, 3, 4, 5, 6, 8, 9, 10, 12 is the sequence of the first 10 ugly numbers.
Note:
1 is typically treated as an ugly number.
n does not exceed 1690.
[
| 114 |
HUEOJ5RA5POS
|
Given an 2D board, count how many battleships are in it. The battleships are represented with 'X's, empty slots are represented with '.'s. You may assume the following rules:
You receive a valid board, made of only battleships or empty slots.
Battleships can only be placed horizontally or vertically. In other words, they can only be made of the shape 1xN (1 row, N columns) or Nx1 (N rows, 1 column), where N can be of any size.
At least one horizontal or vertical cell separates between two battleships - there are no adjacent battleships.
Example:
X..X
...X
...X
In the above board there are 2 battleships.
Invalid Example:
...X
XXXX
...X
This is an invalid board that you will not receive - as battleships will always have a cell separating between them.
Follow up:Could you do it in one-pass, using only O(1) extra memory and without modifying the value of the board?
[
| 215 |
SCU4JAUFLD3A
|
Given a positive integer n, find the least number of perfect square numbers (for example, 1, 4, 9, 16, ...) which sum to n.
Example 1:
Input: n = 12
Output: 3
Explanation: 12 = 4 + 4 + 4.
Example 2:
Input: n = 13
Output: 2
Explanation: 13 = 4 + 9.
[
| 94 |
R86LLV6XKSYN
|
We are given an array A of N lowercase letter strings, all of the same length.
Now, we may choose any set of deletion indices, and for each string, we delete all the characters in those indices.
For example, if we have an array A = ["babca","bbazb"] and deletion indices {0, 1, 4}, then the final array after deletions is ["bc","az"].
Suppose we chose a set of deletion indices D such that after deletions, the final array has every element (row) in lexicographic order.
For clarity, A[0] is in lexicographic order (ie. A[0][0] <= A[0][1] <= ... <= A[0][A[0].length - 1]), A[1] is in lexicographic order (ie. A[1][0] <= A[1][1] <= ... <= A[1][A[1].length - 1]), and so on.
Return the minimum possible value of D.length.
Example 1:
Input: ["babca","bbazb"]
Output: 3
Explanation: After deleting columns 0, 1, and 4, the final array is A = ["bc", "az"].
Both these rows are individually in lexicographic order (ie. A[0][0] <= A[0][1] and A[1][0] <= A[1][1]).
Note that A[0] > A[1] - the array A isn't necessarily in lexicographic order.
Example 2:
Input: ["edcba"]
Output: 4
Explanation: If we delete less than 4 columns, the only row won't be lexicographically sorted.
Example 3:
Input: ["ghi","def","abc"]
Output: 0
Explanation: All rows are already lexicographically sorted.
Note:
1 <= A.length <= 100
1 <= A[i].length <= 100
[
| 421 |
YNM2F0ICRH02
|
Given an array which consists of non-negative integers and an integer m, you can split the array into m non-empty continuous subarrays. Write an algorithm to minimize the largest sum among these m subarrays.
Note:
If n is the length of array, assume the following constraints are satisfied:
1 ≤ n ≤ 1000
1 ≤ m ≤ min(50, n)
Examples:
Input:
nums = [7,2,5,10,8]
m = 2
Output:
18
Explanation:
There are four ways to split nums into two subarrays.
The best way is to split it into [7,2,5] and [10,8],
where the largest sum among the two subarrays is only 18.
[
| 153 |
QQHN4SDD7EB0
|
Given an array of integers nums and an integer k. A continuous subarray is called nice if there are k odd numbers on it.
Return the number of nice sub-arrays.
Example 1:
Input: nums = [1,1,2,1,1], k = 3
Output: 2
Explanation: The only sub-arrays with 3 odd numbers are [1,1,2,1] and [1,2,1,1].
Example 2:
Input: nums = [2,4,6], k = 1
Output: 0
Explanation: There is no odd numbers in the array.
Example 3:
Input: nums = [2,2,2,1,2,2,1,2,2,2], k = 2
Output: 16
Constraints:
1 <= nums.length <= 50000
1 <= nums[i] <= 10^5
1 <= k <= nums.length
[
| 203 |
75195KOG0OD0
|
Given two strings s1 and s2, write a function to return true if s2 contains the permutation of s1. In other words, one of the first string's permutations is the substring of the second string.
Example 1:
Input:s1 = "ab" s2 = "eidbaooo"
Output:True
Explanation: s2 contains one permutation of s1 ("ba").
Example 2:
Input:s1= "ab" s2 = "eidboaoo"
Output: False
Note:
The input strings only contain lower case letters.
The length of both given strings is in range [1, 10,000].
[
| 133 |
LJUROV834WWM
|
Given an array of integers, return the maximum sum for a non-empty subarray (contiguous elements) with at most one element deletion. In other words, you want to choose a subarray and optionally delete one element from it so that there is still at least one element left and the sum of the remaining elements is maximum possible.
Note that the subarray needs to be non-empty after deleting one element.
Example 1:
Input: arr = [1,-2,0,3]
Output: 4
Explanation: Because we can choose [1, -2, 0, 3] and drop -2, thus the subarray [1, 0, 3] becomes the maximum value.
Example 2:
Input: arr = [1,-2,-2,3]
Output: 3
Explanation: We just choose [3] and it's the maximum sum.
Example 3:
Input: arr = [-1,-1,-1,-1]
Output: -1
Explanation: The final subarray needs to be non-empty. You can't choose [-1] and delete -1 from it, then get an empty subarray to make the sum equals to 0.
Constraints:
1 <= arr.length <= 10^5
-10^4 <= arr[i] <= 10^4
[
| 277 |
0VCWKIASLI1N
|
Given an array nums of integers, you can perform operations on the array.
In each operation, you pick any nums[i] and delete it to earn nums[i] points. After, you must delete every element equal to nums[i] - 1 or nums[i] + 1.
You start with 0 points. Return the maximum number of points you can earn by applying such operations.
Example 1:
Input: nums = [3, 4, 2]
Output: 6
Explanation:
Delete 4 to earn 4 points, consequently 3 is also deleted.
Then, delete 2 to earn 2 points. 6 total points are earned.
Example 2:
Input: nums = [2, 2, 3, 3, 3, 4]
Output: 9
Explanation:
Delete 3 to earn 3 points, deleting both 2's and the 4.
Then, delete 3 again to earn 3 points, and 3 again to earn 3 points.
9 total points are earned.
Note:
The length of nums is at most 20000.
Each element nums[i] is an integer in the range [1, 10000].
[
| 253 |
FGO9FCA82UG8
|
Given an array A of positive integers, call a (contiguous, not necessarily distinct) subarray of A good if the number of different integers in that subarray is exactly K.
(For example, [1,2,3,1,2] has 3 different integers: 1, 2, and 3.)
Return the number of good subarrays of A.
Example 1:
Input: A = [1,2,1,2,3], K = 2
Output: 7
Explanation: Subarrays formed with exactly 2 different integers: [1,2], [2,1], [1,2], [2,3], [1,2,1], [2,1,2], [1,2,1,2].
Example 2:
Input: A = [1,2,1,3,4], K = 3
Output: 3
Explanation: Subarrays formed with exactly 3 different integers: [1,2,1,3], [2,1,3], [1,3,4].
Note:
1 <= A.length <= 20000
1 <= A[i] <= A.length
1 <= K <= A.length
[
| 255 |
V27BMSZ0OD3X
|
On a broken calculator that has a number showing on its display, we can perform two operations:
Double: Multiply the number on the display by 2, or;
Decrement: Subtract 1 from the number on the display.
Initially, the calculator is displaying the number X.
Return the minimum number of operations needed to display the number Y.
Example 1:
Input: X = 2, Y = 3
Output: 2
Explanation: Use double operation and then decrement operation {2 -> 4 -> 3}.
Example 2:
Input: X = 5, Y = 8
Output: 2
Explanation: Use decrement and then double {5 -> 4 -> 8}.
Example 3:
Input: X = 3, Y = 10
Output: 3
Explanation: Use double, decrement and double {3 -> 6 -> 5 -> 10}.
Example 4:
Input: X = 1024, Y = 1
Output: 1023
Explanation: Use decrement operations 1023 times.
Note:
1 <= X <= 10^9
1 <= Y <= 10^9
[
| 245 |
AAO47GV0K0XI
|
Given a list of words, each word consists of English lowercase letters.
Let's say word1 is a predecessor of word2 if and only if we can add exactly one letter anywhere in word1 to make it equal to word2. For example, "abc" is a predecessor of "abac".
A word chain is a sequence of words [word_1, word_2, ..., word_k] with k >= 1, where word_1 is a predecessor of word_2, word_2 is a predecessor of word_3, and so on.
Return the longest possible length of a word chain with words chosen from the given list of words.
Example 1:
Input: ["a","b","ba","bca","bda","bdca"]
Output: 4
Explanation: one of the longest word chain is "a","ba","bda","bdca".
Note:
1 <= words.length <= 1000
1 <= words[i].length <= 16
words[i] only consists of English lowercase letters.
[
| 222 |
7KRWZJGBQ0PV
|
Given an array of integers nums and an integer target.
Return the number of non-empty subsequences of nums such that the sum of the minimum and maximum element on it is less or equal than target.
Since the answer may be too large, return it modulo 10^9 + 7.
Example 1:
Input: nums = [3,5,6,7], target = 9
Output: 4
Explanation: There are 4 subsequences that satisfy the condition.
[3] -> Min value + max value <= target (3 + 3 <= 9)
[3,5] -> (3 + 5 <= 9)
[3,5,6] -> (3 + 6 <= 9)
[3,6] -> (3 + 6 <= 9)
Example 2:
Input: nums = [3,3,6,8], target = 10
Output: 6
Explanation: There are 6 subsequences that satisfy the condition. (nums can have repeated numbers).
[3] , [3] , [3,3], [3,6] , [3,6] , [3,3,6]
Example 3:
Input: nums = [2,3,3,4,6,7], target = 12
Output: 61
Explanation: There are 63 non-empty subsequences, two of them don't satisfy the condition ([6,7], [7]).
Number of valid subsequences (63 - 2 = 61).
Example 4:
Input: nums = [5,2,4,1,7,6,8], target = 16
Output: 127
Explanation: All non-empty subset satisfy the condition (2^7 - 1) = 127
Constraints:
1 <= nums.length <= 10^5
1 <= nums[i] <= 10^6
1 <= target <= 10^6
[
| 407 |
JWM137N7Z0ES
|
A die simulator generates a random number from 1 to 6 for each roll. You introduced a constraint to the generator such that it cannot roll the number i more than rollMax[i] (1-indexed) consecutive times.
Given an array of integers rollMax and an integer n, return the number of distinct sequences that can be obtained with exact n rolls.
Two sequences are considered different if at least one element differs from each other. Since the answer may be too large, return it modulo 10^9 + 7.
Example 1:
Input: n = 2, rollMax = [1,1,2,2,2,3]
Output: 34
Explanation: There will be 2 rolls of die, if there are no constraints on the die, there are 6 * 6 = 36 possible combinations. In this case, looking at rollMax array, the numbers 1 and 2 appear at most once consecutively, therefore sequences (1,1) and (2,2) cannot occur, so the final answer is 36-2 = 34.
Example 2:
Input: n = 2, rollMax = [1,1,1,1,1,1]
Output: 30
Example 3:
Input: n = 3, rollMax = [1,1,1,2,2,3]
Output: 181
Constraints:
1 <= n <= 5000
rollMax.length == 6
1 <= rollMax[i] <= 15
[
| 326 |
X9L0FI6KWMSW
|
Given integers n and k, find the lexicographically k-th smallest integer in the range from 1 to n.
Note: 1 ≤ k ≤ n ≤ 109.
Example:
Input:
n: 13 k: 2
Output:
10
Explanation:
The lexicographical order is [1, 10, 11, 12, 13, 2, 3, 4, 5, 6, 7, 8, 9], so the second smallest number is 10.
[
| 111 |
CCRGEAH1A4A3
|
Write an efficient algorithm that searches for a value in an m x n matrix. This matrix has the following properties:
Integers in each row are sorted from left to right.
The first integer of each row is greater than the last integer of the previous row.
Example 1:
Input:
matrix = [
[1, 3, 5, 7],
[10, 11, 16, 20],
[23, 30, 34, 50]
]
target = 3
Output: true
Example 2:
Input:
matrix = [
[1, 3, 5, 7],
[10, 11, 16, 20],
[23, 30, 34, 50]
]
target = 13
Output: false
[
| 176 |
Q8U541C2GJT7
|
You are given an array representing a row of seats where seats[i] = 1 represents a person sitting in the ith seat, and seats[i] = 0 represents that the ith seat is empty (0-indexed).
There is at least one empty seat, and at least one person sitting.
Alex wants to sit in the seat such that the distance between him and the closest person to him is maximized.
Return that maximum distance to the closest person.
Example 1:
Input: seats = [1,0,0,0,1,0,1]
Output: 2
Explanation:
If Alex sits in the second open seat (i.e. seats[2]), then the closest person has distance 2.
If Alex sits in any other open seat, the closest person has distance 1.
Thus, the maximum distance to the closest person is 2.
Example 2:
Input: seats = [1,0,0,0]
Output: 3
Explanation:
If Alex sits in the last seat (i.e. seats[3]), the closest person is 3 seats away.
This is the maximum distance possible, so the answer is 3.
Example 3:
Input: seats = [0,1]
Output: 1
Constraints:
2 <= seats.length <= 2 * 104
seats[i] is 0 or 1.
At least one seat is empty.
At least one seat is occupied.
[
| 302 |
UI1J2WLQNTMZ
|
To some string S, we will perform some replacement operations that replace groups of letters with new ones (not necessarily the same size).
Each replacement operation has 3 parameters: a starting index i, a source word x and a target word y. The rule is that if x starts at position i in the original string S, then we will replace that occurrence of x with y. If not, we do nothing.
For example, if we have S = "abcd" and we have some replacement operation i = 2, x = "cd", y = "ffff", then because "cd" starts at position 2 in the original string S, we will replace it with "ffff".
Using another example on S = "abcd", if we have both the replacement operation i = 0, x = "ab", y = "eee", as well as another replacement operation i = 2, x = "ec", y = "ffff", this second operation does nothing because in the original string S[2] = 'c', which doesn't match x[0] = 'e'.
All these operations occur simultaneously. It's guaranteed that there won't be any overlap in replacement: for example, S = "abc", indexes = [0, 1], sources = ["ab","bc"] is not a valid test case.
Example 1:
Input: S = "abcd", indexes = [0,2], sources = ["a","cd"], targets = ["eee","ffff"]
Output: "eeebffff"
Explanation: "a" starts at index 0 in S, so it's replaced by "eee".
"cd" starts at index 2 in S, so it's replaced by "ffff".
Example 2:
Input: S = "abcd", indexes = [0,2], sources = ["ab","ec"], targets = ["eee","ffff"]
Output: "eeecd"
Explanation: "ab" starts at index 0 in S, so it's replaced by "eee".
"ec" doesn't starts at index 2 in the original S, so we do nothing.
Notes:
0 <= indexes.length = sources.length = targets.length <= 100
0 < indexes[i] < S.length <= 1000
All characters in given inputs are lowercase letters.
[
| 498 |
K27S2HJ21V1U
|
Given a square array of integers A, we want the minimum sum of a falling path through A.
A falling path starts at any element in the first row, and chooses one element from each row. The next row's choice must be in a column that is different from the previous row's column by at most one.
Example 1:
Input: [[1,2,3],[4,5,6],[7,8,9]]
Output: 12
Explanation:
The possible falling paths are:
[1,4,7], [1,4,8], [1,5,7], [1,5,8], [1,5,9]
[2,4,7], [2,4,8], [2,5,7], [2,5,8], [2,5,9], [2,6,8], [2,6,9]
[3,5,7], [3,5,8], [3,5,9], [3,6,8], [3,6,9]
The falling path with the smallest sum is [1,4,7], so the answer is 12.
Constraints:
1 <= A.length == A[0].length <= 100
-100 <= A[i][j] <= 100
[
| 275 |
HI40MSLYX4HB
|
A conveyor belt has packages that must be shipped from one port to another within D days.
The i-th package on the conveyor belt has a weight of weights[i]. Each day, we load the ship with packages on the conveyor belt (in the order given by weights). We may not load more weight than the maximum weight capacity of the ship.
Return the least weight capacity of the ship that will result in all the packages on the conveyor belt being shipped within D days.
Example 1:
Input: weights = [1,2,3,4,5,6,7,8,9,10], D = 5
Output: 15
Explanation:
A ship capacity of 15 is the minimum to ship all the packages in 5 days like this:
1st day: 1, 2, 3, 4, 5
2nd day: 6, 7
3rd day: 8
4th day: 9
5th day: 10
Note that the cargo must be shipped in the order given, so using a ship of capacity 14 and splitting the packages into parts like (2, 3, 4, 5), (1, 6, 7), (8), (9), (10) is not allowed.
Example 2:
Input: weights = [3,2,2,4,1,4], D = 3
Output: 6
Explanation:
A ship capacity of 6 is the minimum to ship all the packages in 3 days like this:
1st day: 3, 2
2nd day: 2, 4
3rd day: 1, 4
Example 3:
Input: weights = [1,2,3,1,1], D = 4
Output: 3
Explanation:
1st day: 1
2nd day: 2
3rd day: 3
4th day: 1, 1
Constraints:
1 <= D <= weights.length <= 50000
1 <= weights[i] <= 500
[
| 442 |
6Z10VDRF14K0
|
Given a rectangle of size n x m, find the minimum number of integer-sided squares that tile the rectangle.
Example 1:
Input: n = 2, m = 3
Output: 3
Explanation: 3 squares are necessary to cover the rectangle.
2 (squares of 1x1)
1 (square of 2x2)
Example 2:
Input: n = 5, m = 8
Output: 5
Example 3:
Input: n = 11, m = 13
Output: 6
Constraints:
1 <= n <= 13
1 <= m <= 13
[
| 137 |
NX33ULVXAXBJ
|
There are n people and 40 types of hats labeled from 1 to 40.
Given a list of list of integers hats, where hats[i] is a list of all hats preferred by the i-th person.
Return the number of ways that the n people wear different hats to each other.
Since the answer may be too large, return it modulo 10^9 + 7.
Example 1:
Input: hats = [[3,4],[4,5],[5]]
Output: 1
Explanation: There is only one way to choose hats given the conditions.
First person choose hat 3, Second person choose hat 4 and last one hat 5.
Example 2:
Input: hats = [[3,5,1],[3,5]]
Output: 4
Explanation: There are 4 ways to choose hats
(3,5), (5,3), (1,3) and (1,5)
Example 3:
Input: hats = [[1,2,3,4],[1,2,3,4],[1,2,3,4],[1,2,3,4]]
Output: 24
Explanation: Each person can choose hats labeled from 1 to 4.
Number of Permutations of (1,2,3,4) = 24.
Example 4:
Input: hats = [[1,2,3],[2,3,5,6],[1,3,7,9],[1,8,9],[2,5,7]]
Output: 111
Constraints:
n == hats.length
1 <= n <= 10
1 <= hats[i].length <= 40
1 <= hats[i][j] <= 40
hats[i] contains a list of unique integers.
[
| 376 |
2ITM5HGIOT97
|
Given a 2D array A, each cell is 0 (representing sea) or 1 (representing land)
A move consists of walking from one land square 4-directionally to another land square, or off the boundary of the grid.
Return the number of land squares in the grid for which we cannot walk off the boundary of the grid in any number of moves.
Example 1:
Input: [[0,0,0,0],[1,0,1,0],[0,1,1,0],[0,0,0,0]]
Output: 3
Explanation:
There are three 1s that are enclosed by 0s, and one 1 that isn't enclosed because its on the boundary.
Example 2:
Input: [[0,1,1,0],[0,0,1,0],[0,0,1,0],[0,0,0,0]]
Output: 0
Explanation:
All 1s are either on the boundary or can reach the boundary.
Note:
1 <= A.length <= 500
1 <= A[i].length <= 500
0 <= A[i][j] <= 1
All rows have the same size.
[
| 256 |
53HBDCKVDW07
|
You are given two jugs with capacities x and y litres. There is an infinite amount of water supply available.
You need to determine whether it is possible to measure exactly z litres using these two jugs.
If z liters of water is measurable, you must have z liters of water contained within one or both buckets by the end.
Operations allowed:
Fill any of the jugs completely with water.
Empty any of the jugs.
Pour water from one jug into another till the other jug is completely full or the first jug itself is empty.
Example 1: (From the famous "Die Hard" example)
Input: x = 3, y = 5, z = 4
Output: True
Example 2:
Input: x = 2, y = 6, z = 5
Output: False
Credits:Special thanks to @vinod23 for adding this problem and creating all test cases.
[
| 189 |
GF0T2G6UQY6A
|
Let's define a function countUniqueChars(s) that returns the number of unique characters on s, for example if s = "LEETCODE" then "L", "T","C","O","D" are the unique characters since they appear only once in s, therefore countUniqueChars(s) = 5.
On this problem given a string s we need to return the sum of countUniqueChars(t) where t is a substring of s. Notice that some substrings can be repeated so on this case you have to count the repeated ones too.
Since the answer can be very large, return the answer modulo 10 ^ 9 + 7.
Example 1:
Input: s = "ABC"
Output: 10
Explanation: All possible substrings are: "A","B","C","AB","BC" and "ABC".
Evey substring is composed with only unique letters.
Sum of lengths of all substring is 1 + 1 + 1 + 2 + 2 + 3 = 10
Example 2:
Input: s = "ABA"
Output: 8
Explanation: The same as example 1, except countUniqueChars("ABA") = 1.
Example 3:
Input: s = "LEETCODE"
Output: 92
Constraints:
0 <= s.length <= 10^4
s contain upper-case English letters only.
[
| 296 |
HVBZKK0JOKHA
|
Find the length of the longest substring T of a given string (consists of lowercase letters only) such that every character in T appears no less than k times.
Example 1:
Input:
s = "aaabb", k = 3
Output:
3
The longest substring is "aaa", as 'a' is repeated 3 times.
Example 2:
Input:
s = "ababbc", k = 2
Output:
5
The longest substring is "ababb", as 'a' is repeated 2 times and 'b' is repeated 3 times.
[
| 121 |
W4V72J2MEZEE
|
Given an array nums containing n + 1 integers where each integer is between 1 and n (inclusive), prove that at least one duplicate number must exist. Assume that there is only one duplicate number, find the duplicate one.
Example 1:
Input: [1,3,4,2,2]
Output: 2
Example 2:
Input: [3,1,3,4,2]
Output: 3
Note:
You must not modify the array (assume the array is read only).
You must use only constant, O(1) extra space.
Your runtime complexity should be less than O(n2).
There is only one duplicate number in the array, but it could be repeated more than once.
[
| 154 |
A42UAPBNO3KF
|
A chef has collected data on the satisfaction level of his n dishes. Chef can cook any dish in 1 unit of time.
Like-time coefficient of a dish is defined as the time taken to cook that dish including previous dishes multiplied by its satisfaction level i.e. time[i]*satisfaction[i]
Return the maximum sum of Like-time coefficient that the chef can obtain after dishes preparation.
Dishes can be prepared in any order and the chef can discard some dishes to get this maximum value.
Example 1:
Input: satisfaction = [-1,-8,0,5,-9]
Output: 14
Explanation: After Removing the second and last dish, the maximum total Like-time coefficient will be equal to (-1*1 + 0*2 + 5*3 = 14). Each dish is prepared in one unit of time.
Example 2:
Input: satisfaction = [4,3,2]
Output: 20
Explanation: Dishes can be prepared in any order, (2*1 + 3*2 + 4*3 = 20)
Example 3:
Input: satisfaction = [-1,-4,-5]
Output: 0
Explanation: People don't like the dishes. No dish is prepared.
Example 4:
Input: satisfaction = [-2,5,-1,0,3,-3]
Output: 35
Constraints:
n == satisfaction.length
1 <= n <= 500
-10^3 <= satisfaction[i] <= 10^3
[
| 321 |
XH5H82POLSRM
|
Given a m x n binary matrix mat. In one step, you can choose one cell and flip it and all the four neighbours of it if they exist (Flip is changing 1 to 0 and 0 to 1). A pair of cells are called neighboors if they share one edge.
Return the minimum number of steps required to convert mat to a zero matrix or -1 if you cannot.
Binary matrix is a matrix with all cells equal to 0 or 1 only.
Zero matrix is a matrix with all cells equal to 0.
Example 1:
Input: mat = [[0,0],[0,1]]
Output: 3
Explanation: One possible solution is to flip (1, 0) then (0, 1) and finally (1, 1) as shown.
Example 2:
Input: mat = [[0]]
Output: 0
Explanation: Given matrix is a zero matrix. We don't need to change it.
Example 3:
Input: mat = [[1,1,1],[1,0,1],[0,0,0]]
Output: 6
Example 4:
Input: mat = [[1,0,0],[1,0,0]]
Output: -1
Explanation: Given matrix can't be a zero matrix
Constraints:
m == mat.length
n == mat[0].length
1 <= m <= 3
1 <= n <= 3
mat[i][j] is 0 or 1.
[
| 319 |
PRFRLJL5UY3J
|
Given a non-empty array of unique positive integers A, consider the following graph:
There are A.length nodes, labelled A[0] to A[A.length - 1];
There is an edge between A[i] and A[j] if and only if A[i] and A[j] share a common factor greater than 1.
Return the size of the largest connected component in the graph.
Example 1:
Input: [4,6,15,35]
Output: 4
Example 2:
Input: [20,50,9,63]
Output: 2
Example 3:
Input: [2,3,6,7,4,12,21,39]
Output: 8
Note:
1 <= A.length <= 20000
1 <= A[i] <= 100000
[
| 173 |
DSM5R2YEJQNI
|
We have a list of bus routes. Each routes[i] is a bus route that the i-th bus repeats forever. For example if routes[0] = [1, 5, 7], this means that the first bus (0-th indexed) travels in the sequence 1->5->7->1->5->7->1->... forever.
We start at bus stop S (initially not on a bus), and we want to go to bus stop T. Travelling by buses only, what is the least number of buses we must take to reach our destination? Return -1 if it is not possible.
Example:
Input:
routes = [[1, 2, 7], [3, 6, 7]]
S = 1
T = 6
Output: 2
Explanation:
The best strategy is take the first bus to the bus stop 7, then take the second bus to the bus stop 6.
Constraints:
1 <= routes.length <= 500.
1 <= routes[i].length <= 10^5.
0 <= routes[i][j] < 10 ^ 6.
[
| 239 |
UB2F67PQNJAG
|
Given an input string (s) and a pattern (p), implement regular expression matching with support for '.' and '*'.
'.' Matches any single character.
'*' Matches zero or more of the preceding element.
The matching should cover the entire input string (not partial).
Note:
s could be empty and contains only lowercase letters a-z.
p could be empty and contains only lowercase letters a-z, and characters like . or *.
Example 1:
Input:
s = "aa"
p = "a"
Output: false
Explanation: "a" does not match the entire string "aa".
Example 2:
Input:
s = "aa"
p = "a*"
Output: true
Explanation: '*' means zero or more of the precedeng element, 'a'. Therefore, by repeating 'a' once, it becomes "aa".
Example 3:
Input:
s = "ab"
p = ".*"
Output: true
Explanation: ".*" means "zero or more (*) of any character (.)".
Example 4:
Input:
s = "aab"
p = "c*a*b"
Output: true
Explanation: c can be repeated 0 times, a can be repeated 1 time. Therefore it matches "aab".
Example 5:
Input:
s = "mississippi"
p = "mis*is*p*."
Output: false
[
| 294 |
HWCWT26814QT
|
Say you have an array for which the ith element is the price of a given stock on day i.
Design an algorithm to find the maximum profit. You may complete at most k transactions.
Note:
You may not engage in multiple transactions at the same time (ie, you must sell the stock before you buy again).
Example 1:
Input: [2,4,1], k = 2
Output: 2
Explanation: Buy on day 1 (price = 2) and sell on day 2 (price = 4), profit = 4-2 = 2.
Example 2:
Input: [3,2,6,5,0,3], k = 2
Output: 7
Explanation: Buy on day 2 (price = 2) and sell on day 3 (price = 6), profit = 6-2 = 4.
Then buy on day 5 (price = 0) and sell on day 6 (price = 3), profit = 3-0 = 3.
[
| 223 |
5KSWCY3MDJIX
|
Given an array A of strings, find any smallest string that contains each string in A as a substring.
We may assume that no string in A is substring of another string in A.
Example 1:
Input: ["alex","loves","leetcode"]
Output: "alexlovesleetcode"
Explanation: All permutations of "alex","loves","leetcode" would also be accepted.
Example 2:
Input: ["catg","ctaagt","gcta","ttca","atgcatc"]
Output: "gctaagttcatgcatc"
Note:
1 <= A.length <= 12
1 <= A[i].length <= 20
[
| 140 |
AZUREP5DJ4G6
|
Given an unsorted array, find the maximum difference between the successive elements in its sorted form.
Return 0 if the array contains less than 2 elements.
Example 1:
Input: [3,6,9,1]
Output: 3
Explanation: The sorted form of the array is [1,3,6,9], either
(3,6) or (6,9) has the maximum difference 3.
Example 2:
Input: [10]
Output: 0
Explanation: The array contains less than 2 elements, therefore return 0.
Note:
You may assume all elements in the array are non-negative integers and fit in the 32-bit signed integer range.
Try to solve it in linear time/space.
[
| 160 |
17EGKBJAC3XK
|
Given N, consider a convex N-sided polygon with vertices labelled A[0], A[i], ..., A[N-1] in clockwise order.
Suppose you triangulate the polygon into N-2 triangles. For each triangle, the value of that triangle is the product of the labels of the vertices, and the total score of the triangulation is the sum of these values over all N-2 triangles in the triangulation.
Return the smallest possible total score that you can achieve with some triangulation of the polygon.
Example 1:
Input: [1,2,3]
Output: 6
Explanation: The polygon is already triangulated, and the score of the only triangle is 6.
Example 2:
Input: [3,7,4,5]
Output: 144
Explanation: There are two triangulations, with possible scores: 3*7*5 + 4*5*7 = 245, or 3*4*5 + 3*4*7 = 144. The minimum score is 144.
Example 3:
Input: [1,3,1,4,1,5]
Output: 13
Explanation: The minimum score triangulation has score 1*1*3 + 1*1*4 + 1*1*5 + 1*1*1 = 13.
Note:
3 <= A.length <= 50
1 <= A[i] <= 100
[
| 306 |
S1L0XOVXQ5CR
|
A positive integer is magical if it is divisible by either A or B.
Return the N-th magical number. Since the answer may be very large, return it modulo 10^9 + 7.
Example 1:
Input: N = 1, A = 2, B = 3
Output: 2
Example 2:
Input: N = 4, A = 2, B = 3
Output: 6
Example 3:
Input: N = 5, A = 2, B = 4
Output: 10
Example 4:
Input: N = 3, A = 6, B = 4
Output: 8
Note:
1 <= N <= 10^9
2 <= A <= 40000
2 <= B <= 40000
[
| 182 |
761L1MRLPSHX
|
Given a non-empty array containing only positive integers, find if the array can be partitioned into two subsets such that the sum of elements in both subsets is equal.
Note:
Each of the array element will not exceed 100.
The array size will not exceed 200.
Example 1:
Input: [1, 5, 11, 5]
Output: true
Explanation: The array can be partitioned as [1, 5, 5] and [11].
Example 2:
Input: [1, 2, 3, 5]
Output: false
Explanation: The array cannot be partitioned into equal sum subsets.
[
| 136 |
8EVSPX9S8TXH
|
You are given two sorted arrays of distinct integers nums1 and nums2.
A valid path is defined as follows:
Choose array nums1 or nums2 to traverse (from index-0).
Traverse the current array from left to right.
If you are reading any value that is present in nums1 and nums2 you are allowed to change your path to the other array. (Only one repeated value is considered in the valid path).
Score is defined as the sum of uniques values in a valid path.
Return the maximum score you can obtain of all possible valid paths.
Since the answer may be too large, return it modulo 10^9 + 7.
Example 1:
Input: nums1 = [2,4,5,8,10], nums2 = [4,6,8,9]
Output: 30
Explanation: Valid paths:
[2,4,5,8,10], [2,4,5,8,9], [2,4,6,8,9], [2,4,6,8,10], (starting from nums1)
[4,6,8,9], [4,5,8,10], [4,5,8,9], [4,6,8,10] (starting from nums2)
The maximum is obtained with the path in green [2,4,6,8,10].
Example 2:
Input: nums1 = [1,3,5,7,9], nums2 = [3,5,100]
Output: 109
Explanation: Maximum sum is obtained with the path [1,3,5,100].
Example 3:
Input: nums1 = [1,2,3,4,5], nums2 = [6,7,8,9,10]
Output: 40
Explanation: There are no common elements between nums1 and nums2.
Maximum sum is obtained with the path [6,7,8,9,10].
Example 4:
Input: nums1 = [1,4,5,8,9,11,19], nums2 = [2,3,4,11,12]
Output: 61
Constraints:
1 <= nums1.length <= 10^5
1 <= nums2.length <= 10^5
1 <= nums1[i], nums2[i] <= 10^7
nums1 and nums2 are strictly increasing.
[
| 519 |
10WEW6X188XV
|
Write a function to check whether an input string is a valid IPv4 address or IPv6 address or neither.
IPv4 addresses are canonically represented in dot-decimal notation, which consists of four decimal numbers, each ranging from 0 to 255, separated by dots ("."), e.g.,172.16.254.1;
Besides, leading zeros in the IPv4 is invalid. For example, the address 172.16.254.01 is invalid.
IPv6 addresses are represented as eight groups of four hexadecimal digits, each group representing 16 bits. The groups are separated by colons (":"). For example, the address 2001:0db8:85a3:0000:0000:8a2e:0370:7334 is a valid one. Also, we could omit some leading zeros among four hexadecimal digits and some low-case characters in the address to upper-case ones, so 2001:db8:85a3:0:0:8A2E:0370:7334 is also a valid IPv6 address(Omit leading zeros and using upper cases).
However, we don't replace a consecutive group of zero value with a single empty group using two consecutive colons (::) to pursue simplicity. For example, 2001:0db8:85a3::8A2E:0370:7334 is an invalid IPv6 address.
Besides, extra leading zeros in the IPv6 is also invalid. For example, the address 02001:0db8:85a3:0000:0000:8a2e:0370:7334 is invalid.
Note:
You may assume there is no extra space or special characters in the input string.
Example 1:
Input: "172.16.254.1"
Output: "IPv4"
Explanation: This is a valid IPv4 address, return "IPv4".
Example 2:
Input: "2001:0db8:85a3:0:0:8A2E:0370:7334"
Output: "IPv6"
Explanation: This is a valid IPv6 address, return "IPv6".
Example 3:
Input: "256.256.256.256"
Output: "Neither"
Explanation: This is neither a IPv4 address nor a IPv6 address.
[
| 484 |
Z2OJ2B97WUP2
|
Given an array of n positive integers and a positive integer s, find the minimal length of a contiguous subarray of which the sum ≥ s. If there isn't one, return 0 instead.
Example:
Input: s = 7, nums = [2,3,1,2,4,3]
Output: 2
Explanation: the subarray [4,3] has the minimal length under the problem constraint.
Follow up:
If you have figured out the O(n) solution, try coding another solution of which the time complexity is O(n log n).
[
| 120 |
K8YVTBLH20VE
|
A peak element is an element that is greater than its neighbors.
Given an input array nums, where nums[i] ≠ nums[i+1], find a peak element and return its index.
The array may contain multiple peaks, in that case return the index to any one of the peaks is fine.
You may imagine that nums[-1] = nums[n] = -∞.
Example 1:
Input: nums = [1,2,3,1]
Output: 2
Explanation: 3 is a peak element and your function should return the index number 2.
Example 2:
Input: nums = [1,2,1,3,5,6,4]
Output: 1 or 5
Explanation: Your function can return either index number 1 where the peak element is 2,
or index number 5 where the peak element is 6.
Note:
Your solution should be in logarithmic complexity.
[
| 196 |
TZKRG1HWDIIY
|
(This problem is the same as Minimize Malware Spread, with the differences bolded.)
In a network of nodes, each node i is directly connected to another node j if and only if graph[i][j] = 1.
Some nodes initial are initially infected by malware. Whenever two nodes are directly connected and at least one of those two nodes is infected by malware, both nodes will be infected by malware. This spread of malware will continue until no more nodes can be infected in this manner.
Suppose M(initial) is the final number of nodes infected with malware in the entire network, after the spread of malware stops.
We will remove one node from the initial list, completely removing it and any connections from this node to any other node. Return the node that if removed, would minimize M(initial). If multiple nodes could be removed to minimize M(initial), return such a node with the smallest index.
Example 1:
Input: graph = [[1,1,0],[1,1,0],[0,0,1]], initial = [0,1]
Output: 0
Example 2:
Input: graph = [[1,1,0],[1,1,1],[0,1,1]], initial = [0,1]
Output: 1
Example 3:
Input: graph = [[1,1,0,0],[1,1,1,0],[0,1,1,1],[0,0,1,1]], initial = [0,1]
Output: 1
Note:
1 < graph.length = graph[0].length <= 300
0 <= graph[i][j] == graph[j][i] <= 1
graph[i][i] = 1
1 <= initial.length < graph.length
0 <= initial[i] < graph.length
[
| 383 |
0YIJ44PA8LZL
|
Given an array of integers A, consider all non-empty subsequences of A.
For any sequence S, let the width of S be the difference between the maximum and minimum element of S.
Return the sum of the widths of all subsequences of A.
As the answer may be very large, return the answer modulo 10^9 + 7.
Example 1:
Input: [2,1,3]
Output: 6
Explanation:
Subsequences are [1], [2], [3], [2,1], [2,3], [1,3], [2,1,3].
The corresponding widths are 0, 0, 0, 1, 1, 2, 2.
The sum of these widths is 6.
Note:
1 <= A.length <= 20000
1 <= A[i] <= 20000
[
| 185 |
PNJ7HBQ4K3H0
|
Given two positive integers n and k.
A factor of an integer n is defined as an integer i where n % i == 0.
Consider a list of all factors of n sorted in ascending order, return the kth factor in this list or return -1 if n has less than k factors.
Example 1:
Input: n = 12, k = 3
Output: 3
Explanation: Factors list is [1, 2, 3, 4, 6, 12], the 3rd factor is 3.
Example 2:
Input: n = 7, k = 2
Output: 7
Explanation: Factors list is [1, 7], the 2nd factor is 7.
Example 3:
Input: n = 4, k = 4
Output: -1
Explanation: Factors list is [1, 2, 4], there is only 3 factors. We should return -1.
Example 4:
Input: n = 1, k = 1
Output: 1
Explanation: Factors list is [1], the 1st factor is 1.
Example 5:
Input: n = 1000, k = 3
Output: 4
Explanation: Factors list is [1, 2, 4, 5, 8, 10, 20, 25, 40, 50, 100, 125, 200, 250, 500, 1000].
Constraints:
1 <= k <= n <= 1000
[
| 333 |
0HLZLU8PSJHP
|
Given an integer n, your task is to count how many strings of length n can be formed under the following rules:
Each character is a lower case vowel ('a', 'e', 'i', 'o', 'u')
Each vowel 'a' may only be followed by an 'e'.
Each vowel 'e' may only be followed by an 'a' or an 'i'.
Each vowel 'i' may not be followed by another 'i'.
Each vowel 'o' may only be followed by an 'i' or a 'u'.
Each vowel 'u' may only be followed by an 'a'.
Since the answer may be too large, return it modulo 10^9 + 7.
Example 1:
Input: n = 1
Output: 5
Explanation: All possible strings are: "a", "e", "i" , "o" and "u".
Example 2:
Input: n = 2
Output: 10
Explanation: All possible strings are: "ae", "ea", "ei", "ia", "ie", "io", "iu", "oi", "ou" and "ua".
Example 3:
Input: n = 5
Output: 68
Constraints:
1 <= n <= 2 * 10^4
[
| 276 |
LLQVC64O87CU
|
In a special ranking system, each voter gives a rank from highest to lowest to all teams participated in the competition.
The ordering of teams is decided by who received the most position-one votes. If two or more teams tie in the first position, we consider the second position to resolve the conflict, if they tie again, we continue this process until the ties are resolved. If two or more teams are still tied after considering all positions, we rank them alphabetically based on their team letter.
Given an array of strings votes which is the votes of all voters in the ranking systems. Sort all teams according to the ranking system described above.
Return a string of all teams sorted by the ranking system.
Example 1:
Input: votes = ["ABC","ACB","ABC","ACB","ACB"]
Output: "ACB"
Explanation: Team A was ranked first place by 5 voters. No other team was voted as first place so team A is the first team.
Team B was ranked second by 2 voters and was ranked third by 3 voters.
Team C was ranked second by 3 voters and was ranked third by 2 voters.
As most of the voters ranked C second, team C is the second team and team B is the third.
Example 2:
Input: votes = ["WXYZ","XYZW"]
Output: "XWYZ"
Explanation: X is the winner due to tie-breaking rule. X has same votes as W for the first position but X has one vote as second position while W doesn't have any votes as second position.
Example 3:
Input: votes = ["ZMNAGUEDSJYLBOPHRQICWFXTVK"]
Output: "ZMNAGUEDSJYLBOPHRQICWFXTVK"
Explanation: Only one voter so his votes are used for the ranking.
Example 4:
Input: votes = ["BCA","CAB","CBA","ABC","ACB","BAC"]
Output: "ABC"
Explanation:
Team A was ranked first by 2 voters, second by 2 voters and third by 2 voters.
Team B was ranked first by 2 voters, second by 2 voters and third by 2 voters.
Team C was ranked first by 2 voters, second by 2 voters and third by 2 voters.
There is a tie and we rank teams ascending by their IDs.
Example 5:
Input: votes = ["M","M","M","M"]
Output: "M"
Explanation: Only team M in the competition so it has the first rank.
Constraints:
1 <= votes.length <= 1000
1 <= votes[i].length <= 26
votes[i].length == votes[j].length for 0 <= i, j < votes.length.
votes[i][j] is an English upper-case letter.
All characters of votes[i] are unique.
All the characters that occur in votes[0] also occur in votes[j] where 1 <= j < votes.length.
[
| 620 |
BN1UE733JUU0
|
Given an array of citations (each citation is a non-negative integer) of a researcher, write a function to compute the researcher's h-index.
According to the definition of h-index on Wikipedia: "A scientist has index h if h of his/her N papers have at least h citations each, and the other N − h papers have no more than h citations each."
Example:
Input: citations = [3,0,6,1,5]
Output: 3
Explanation: [3,0,6,1,5] means the researcher has 5 papers in total and each of them had
received 3, 0, 6, 1, 5 citations respectively.
Since the researcher has 3 papers with at least 3 citations each and the remaining
two with no more than 3 citations each, her h-index is 3.
Note: If there are several possible values for h, the maximum one is taken as the h-index.
[
| 206 |
VI5OHWGJ6NP8
|
In a given integer array A, we must move every element of A to either list B or list C. (B and C initially start empty.)
Return true if and only if after such a move, it is possible that the average value of B is equal to the average value of C, and B and C are both non-empty.
Example :
Input:
[1,2,3,4,5,6,7,8]
Output: true
Explanation: We can split the array into [1,4,5,8] and [2,3,6,7], and both of them have the average of 4.5.
Note:
The length of A will be in the range [1, 30].
A[i] will be in the range of [0, 10000].
[
| 169 |
BHTOPYE788QA
|
Alice and Bob take turns playing a game, with Alice starting first.
Initially, there are n stones in a pile. On each player's turn, that player makes a move consisting of removing any non-zero square number of stones in the pile.
Also, if a player cannot make a move, he/she loses the game.
Given a positive integer n. Return True if and only if Alice wins the game otherwise return False, assuming both players play optimally.
Example 1:
Input: n = 1
Output: true
Explanation: Alice can remove 1 stone winning the game because Bob doesn't have any moves.
Example 2:
Input: n = 2
Output: false
Explanation: Alice can only remove 1 stone, after that Bob removes the last one winning the game (2 -> 1 -> 0).
Example 3:
Input: n = 4
Output: true
Explanation: n is already a perfect square, Alice can win with one move, removing 4 stones (4 -> 0).
Example 4:
Input: n = 7
Output: false
Explanation: Alice can't win the game if Bob plays optimally.
If Alice starts removing 4 stones, Bob will remove 1 stone then Alice should remove only 1 stone and finally Bob removes the last one (7 -> 3 -> 2 -> 1 -> 0).
If Alice starts removing 1 stone, Bob will remove 4 stones then Alice only can remove 1 stone and finally Bob removes the last one (7 -> 6 -> 2 -> 1 -> 0).
Example 5:
Input: n = 17
Output: false
Explanation: Alice can't win the game if Bob plays optimally.
Constraints:
1 <= n <= 10^5
[
| 379 |
HCOPQX93PPDC
|
Define S = [s,n] as the string S which consists of n connected strings s. For example, ["abc", 3] ="abcabcabc".
On the other hand, we define that string s1 can be obtained from string s2 if we can remove some characters from s2 such that it becomes s1. For example, “abc” can be obtained from “abdbec” based on our definition, but it can not be obtained from “acbbe”.
You are given two non-empty strings s1 and s2 (each at most 100 characters long) and two integers 0 ≤ n1 ≤ 106 and 1 ≤ n2 ≤ 106. Now consider the strings S1 and S2, where S1=[s1,n1] and S2=[s2,n2]. Find the maximum integer M such that [S2,M] can be obtained from S1.
Example:
Input:
s1="acb", n1=4
s2="ab", n2=2
Return:
2
[
| 218 |
IFAFSG2ECOV9
|
Given a binary string s (a string consisting only of '0's and '1's), we can split s into 3 non-empty strings s1, s2, s3 (s1+ s2+ s3 = s).
Return the number of ways s can be split such that the number of characters '1' is the same in s1, s2, and s3.
Since the answer may be too large, return it modulo 10^9 + 7.
Example 1:
Input: s = "10101"
Output: 4
Explanation: There are four ways to split s in 3 parts where each part contain the same number of letters '1'.
"1|010|1"
"1|01|01"
"10|10|1"
"10|1|01"
Example 2:
Input: s = "1001"
Output: 0
Example 3:
Input: s = "0000"
Output: 3
Explanation: There are three ways to split s in 3 parts.
"0|0|00"
"0|00|0"
"00|0|0"
Example 4:
Input: s = "100100010100110"
Output: 12
Constraints:
3 <= s.length <= 10^5
s[i] is '0' or '1'.
[
| 292 |
UBCWCP4UWDCZ
|
Write a program to find the n-th ugly number.
Ugly numbers are positive integers which are divisible by a or b or c.
Example 1:
Input: n = 3, a = 2, b = 3, c = 5
Output: 4
Explanation: The ugly numbers are 2, 3, 4, 5, 6, 8, 9, 10... The 3rd is 4.
Example 2:
Input: n = 4, a = 2, b = 3, c = 4
Output: 6
Explanation: The ugly numbers are 2, 3, 4, 6, 8, 9, 10, 12... The 4th is 6.
Example 3:
Input: n = 5, a = 2, b = 11, c = 13
Output: 10
Explanation: The ugly numbers are 2, 4, 6, 8, 10, 11, 12, 13... The 5th is 10.
Example 4:
Input: n = 1000000000, a = 2, b = 217983653, c = 336916467
Output: 1999999984
Constraints:
1 <= n, a, b, c <= 10^9
1 <= a * b * c <= 10^18
It's guaranteed that the result will be in range [1, 2 * 10^9]
[
| 337 |
JZXUMQ4WBTUW
|
Given a non-empty integer array, find the minimum number of moves required to make all array elements equal, where a move is incrementing a selected element by 1 or decrementing a selected element by 1.
You may assume the array's length is at most 10,000.
Example:
Input:
[1,2,3]
Output:
2
Explanation:
Only two moves are needed (remember each move increments or decrements one element):
[1,2,3] => [2,2,3] => [2,2,2]
[
| 119 |
UE5UU3H129UP
|
You are given an integer array A. From some starting index, you can make a series of jumps. The (1st, 3rd, 5th, ...) jumps in the series are called odd numbered jumps, and the (2nd, 4th, 6th, ...) jumps in the series are called even numbered jumps.
You may from index i jump forward to index j (with i < j) in the following way:
During odd numbered jumps (ie. jumps 1, 3, 5, ...), you jump to the index j such that A[i] <= A[j] and A[j] is the smallest possible value. If there are multiple such indexes j, you can only jump to the smallest such index j.
During even numbered jumps (ie. jumps 2, 4, 6, ...), you jump to the index j such that A[i] >= A[j] and A[j] is the largest possible value. If there are multiple such indexes j, you can only jump to the smallest such index j.
(It may be the case that for some index i, there are no legal jumps.)
A starting index is good if, starting from that index, you can reach the end of the array (index A.length - 1) by jumping some number of times (possibly 0 or more than once.)
Return the number of good starting indexes.
Example 1:
Input: [10,13,12,14,15]
Output: 2
Explanation:
From starting index i = 0, we can jump to i = 2 (since A[2] is the smallest among A[1], A[2], A[3], A[4] that is greater or equal to A[0]), then we can't jump any more.
From starting index i = 1 and i = 2, we can jump to i = 3, then we can't jump any more.
From starting index i = 3, we can jump to i = 4, so we've reached the end.
From starting index i = 4, we've reached the end already.
In total, there are 2 different starting indexes (i = 3, i = 4) where we can reach the end with some number of jumps.
Example 2:
Input: [2,3,1,1,4]
Output: 3
Explanation:
From starting index i = 0, we make jumps to i = 1, i = 2, i = 3:
During our 1st jump (odd numbered), we first jump to i = 1 because A[1] is the smallest value in (A[1], A[2], A[3], A[4]) that is greater than or equal to A[0].
During our 2nd jump (even numbered), we jump from i = 1 to i = 2 because A[2] is the largest value in (A[2], A[3], A[4]) that is less than or equal to A[1]. A[3] is also the largest value, but 2 is a smaller index, so we can only jump to i = 2 and not i = 3.
During our 3rd jump (odd numbered), we jump from i = 2 to i = 3 because A[3] is the smallest value in (A[3], A[4]) that is greater than or equal to A[2].
We can't jump from i = 3 to i = 4, so the starting index i = 0 is not good.
In a similar manner, we can deduce that:
From starting index i = 1, we jump to i = 4, so we reach the end.
From starting index i = 2, we jump to i = 3, and then we can't jump anymore.
From starting index i = 3, we jump to i = 4, so we reach the end.
From starting index i = 4, we are already at the end.
In total, there are 3 different starting indexes (i = 1, i = 3, i = 4) where we can reach the end with some number of jumps.
Example 3:
Input: [5,1,3,4,2]
Output: 3
Explanation:
We can reach the end from starting indexes 1, 2, and 4.
Note:
1 <= A.length <= 20000
0 <= A[i] < 100000
[
| 961 |
BENCJYZJ31O7
|
Given a positive integer K, you need find the smallest positive integer N such that N is divisible by K, and N only contains the digit 1.
Return the length of N. If there is no such N, return -1.
Example 1:
Input: 1
Output: 1
Explanation: The smallest answer is N = 1, which has length 1.
Example 2:
Input: 2
Output: -1
Explanation: There is no such positive integer N divisible by 2.
Example 3:
Input: 3
Output: 3
Explanation: The smallest answer is N = 111, which has length 3.
Note:
1 <= K <= 10^5
[
| 155 |
LGYSP2OY22DE
|
Given an integer n, count the total number of digit 1 appearing in all non-negative integers less than or equal to n.
Example:
Input: 13
Output: 6
Explanation: Digit 1 occurred in the following numbers: 1, 10, 11, 12, 13.
[
| 65 |
F2YGIG24FLBL
|
Given an array of integers and an integer k, you need to find the total number of continuous subarrays whose sum equals to k.
Example 1:
Input:nums = [1,1,1], k = 2
Output: 2
Note:
The length of the array is in range [1, 20,000].
The range of numbers in the array is [-1000, 1000] and the range of the integer k is [-1e7, 1e7].
[
| 105 |
JX530TXVH00X
|
A message containing letters from A-Z is being encoded to numbers using the following mapping:
'A' -> 1
'B' -> 2
...
'Z' -> 26
Given a non-empty string containing only digits, determine the total number of ways to decode it.
Example 1:
Input: "12"
Output: 2
Explanation: It could be decoded as "AB" (1 2) or "L" (12).
Example 2:
Input: "226"
Output: 3
Explanation: It could be decoded as "BZ" (2 26), "VF" (22 6), or "BBF" (2 2 6).
[
| 145 |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.